MakerBot Filament PLA-Small - Bundle for MakerBot Mini and MakerBot Mini+

MakerBot Filament PLA-Small - Bundle for MakerBot Mini and MakerBot Mini+
Excl. Tax: £172.37 Incl. Tax: £206.84

Availability: In stock

MakerBot Filament PLA-Small


10 different hues and colours to get you excited about


True Black/Brown/Green/Blue/Orange/Purple/Red/White/Yellow + Warm Grey


OR
Description

Details

MakerBot Filament PLA-Small - Bundle for MakerBot Mini and MakerBot Mini+

MakerBot Filament PLA-Small

  1. True Black MP05823
  2. True Brown MP06642
  3. True Green MP05951
  4. True Blue MP05796
  5. True Orange MP05787
  6. True Purple MP05788
  7. True Red MP05789
  8. True White MP05790
  9. True Yellow MP05791
  10. True Warm Grey MP05793

MakerBot PLA Filament is the best and most consistent filament for MakerBot Replicator Desktop 3D Printers.

MakerBot PLA Filament is a bioplastic derived from corn. It's guaranteed not to have any heavy metals, phthalates or BPA. Every filament colour is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints. MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts. Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances. Be sure your build plate is level, clean and oil-free before printing.


Additional Information


Tight tolerances to ensure steady flow through the extruder nozzle
Bioplastic derived from corn
1KG spool compatible With Replicator 2
Large spool compatible with Replicator (5th Generation)
Produces highest print quality

Reviews