FLUX Pre filter replacement 4x Beam Air

£18.28
In stock
SKU
BEAMAIR-PRE

FLUX Pre filter replacement 4x Beam Air

Pre-filter replacement

Replacement Pre-filter for Beam Air

Filters require regular replacement

FLUX Pre filter replacement 4x Beam Air

Pre-filter replacement

Replacement Pre-filter for Beam Air

Filters require regular replacement

Replace each filter as per recommended schedule:

  • Pre-Filter (10-30 hours)
  • Medium efficiency filter (50-150 hours)
  • H13 HEPA filter (100-200 hours)
  • Charcoal filter (300-600 hours)

Removal of filters

Open the top cover of the filter and remove the box from the inside.

Then take out the Pre-filter and pull on the lids on each side of the Medium efficiency filter, put this aside and repeat the same steps with the charcoal filter.

The box that's left is the H13 HEPA filter.

Replace what is necessary.

Reassemble:

Reinsert the filters in this order: From right to left

Beam Air filter replacement order

  1. Beam Air (bottom)
  2. H13 HEPA filter
  3. Charcoal filter
  4. Medium efficiency filter
  5. Pre-filter
  6. Lid 

Closing the the lid the user will be ready to continue using the Beam Air with the Flux laser.

Write Your Own Review
You're reviewing:FLUX Pre filter replacement 4x Beam Air
Copyright © Shropshire 3d Print Ltd