3D Jargon Buster

One of the barriers to embracing a technology is the Jargon and 3D printing, like any complex activity, is awash with buzzwords, technical terms and impenetrable jargon. This guide was written to help you to navigate through the 3D keyword minefield.

3D scanner

Any of several processes whereby photographic processes are used to capture a 3D model from a solid object. 3D scanners are currently expensive, and require a lot of manual input to clean up scans before they’re fit for printing.

see our MakerBot 3D scanners here


Acrylonitrile butadiene styrene is a polymer used as the extrudable filament in many 3D printers. It has a relatively high melting point compared to PLA, and is an oil-based material – it takes about 2kg of petroleum to make 1kg of ABS. It’s a strong and very resilient material, often used in conventional manufacturing for children’s toys: both Lego and Playmobil are made of ABS.

See our ABS MakerBot filament here

Additive manufacturing

The term used to describe any process (such as FDM and SLS) whereby a 3D model is build up in stages. It’s differentiated from ‘machining’ approaches, in which a solid material such as wood or plastic is carved and drilled to create the finished model.


An open-source microcontroller named after an Italian historical character. Many 3D printers use an Arduino unit with an attached SD card reader, so that printers can produce standalone models without having to be tethered to a computer.


The base of a 3D printer using the FDM process. While the print head moves from side to side in the X and Y axes, the bed will step down in the Z axis as each layer is complete, ready for printing the next layer.

we offer MakerBot Parts and Spares like Print beds (also known as "MakerBot Build Plates"


A free 3D modeling application published as open source software. Blender is notoriously hard to learn, but is capable of good results.

Bowden cable

The Bowden cable was invented in 1896 by Sir Frank Bowden, the founder of the Raleigh bicycle company, as a way to transmit the pulling power of a bicycle brake lever to the brake mounted on the wheel. In 3D printing terms, the Bowden cable is the plastic tube which feeds the filament from its reel to the hot end.

Build envelope

The maximum physical size of print that can be produced by a specific 3D printer. Build envelopes vary greatly, and are an important consideration when choosing a 3D printer.


Computer Aided Design is the catch-all term for the use of a computer system to produce 2D or 3D models. CAD is not a file format in itself; CAD programs all output 3D files in a variety of commonly-used formats, including OBJ and STL.


Computer Numerical Control is the term for an automated machine that interprets CAD programs in order to cut a variety of materials into specific shapes. Plywood, acrylic and other materials can be cut using CNC machines.


Cura is a 3D print preparation application optimised for the Ultimaker printer, but which can also be used with other RepRap machines. Available for Windows, Mac OS and Linux, it’s a free application that performs slicing operations with a high degree of user control.


The part of a 3D printer that pushes the filament through the Bowden cable to the hot end. This usually takes the form of a knurled, rough-textured roller that grips the filament as it guides it through the cable.

We offer Spare MakerBot Smart Extruders fon our website


Fused Deposition Modeling is the term used to describe a form of additive manufacturing in which plastic filament is melted and squirted onto a movable bed. This is the most common technology employed by home 3D printers. Both the full name and its acronym are the intellectual property of Stratasys Inc, which has led to many people instead using the term FFF (Fused Filament Fabrication).


Fused Filament Fabrication is a term coined by those working on the RepRap project as an open-source alternative to the trademarked FDM (see above). The two terms both refer to identical technologies.


3D printers that use the Fused Deposition Modeling process operate by melting a plastic filament, which is typically made of either ABS or PLA. The filament is available in a range of colours, and is supplied on reels of half a kilogram or more.


we offer quality MakerBot filament on our website


The interior structure of a 3D printed model. Rather than printing a model composed of solid filament, which is both time-consuming and wasteful of material, it’s common practice to print the unseen interior as a mesh of a specified density instead. A fill density of 20%, for example, will add tremendous strength while consuming far less material.


G-code is the file format used to store information that can be interpreted by CNC machines and 3D printers. It addresses every aspect of a 3D object’s manufacturing process, from the thickness of the layers to the printing temperature. A G-code file contains all the instructions needed to allow a 3D printer to build the finished object.

Hot end

The final stage in the printing process, the hot end is a metal block that’s heated to the temperature required to melt the filament for FDM printing. The hot end starts in contact with the printer bed, so that the first layer of filament is forced into the bed to ensure good adhesion.

This part is also called an Smart Extruder. we offer Spares on our website


Laminated Object Manufacturing is a rapid prototyping process in which thin layers of adhesive material are cut to shape and then glued together. Despite its low material costs, LOM has yet to gain traction as a serious 3d printing technology.


The surface of a 3D object when defined as a computer model. Typically, a curved shape will be redefined as a series of flat triangles: the smaller the triangles, the finer the printed result.


A micron (or micrometre) is the term for one millionth of a metre, which is one thousandth of a millimetre (equivalent to roughly 0.000039 inches). Good 3D printers can print at a resolution of as little as 40 microns. For comparison, a human hair is typically 90 microns in diameter


A commercial 3D print preparation application, Netfabb is able to prepare, repair and slice 3D models in preparation for printing. The full version is Netfabb Studio, but Netfabb Engines are cut-down versions customised specifically for individual 3D printer models. See www.netfabb.com.


OBJ is a 3D object file format that was developed by Wavefront Technologies in the early 1990s. Most 3D software is able to export OBJ files, and some 3D printing programs (such as Netfabb and Meshlab) can read objects created in this format.


Polylactic Acid is a form of polyester used as the extrudable filament in some 3D printers. Made from a variety of natural sugar sources, such as corn starch or sugar cane, it melts at a lower temperature than ABS and is biodegradable.

We offer quality MakerBot PLA filament on our website


A latticework platform that supports the object being printed. Some 3D printers require a raft to enable the model to be held securely; others need a raft only if the object has limited points of contact with the bed, such as the legs of a table.

Rapid prototyping

The process of creating a one-off solid representation of a 3D design prior to commencing the manufacturing process. Before the rise of cheap 3D printers, rapid prototyping was an expensive and time-consuming business.

Businesses can save thousands of pounds by utilising Rapid Prototyping in their Manufacturing processes and replacing conventional protoptyping.


RepRap stands for Replicating Rapid Prototyper, and is an open source collaborative project intended to devise a 3D printer that’s capable of printing many of its own constituent parts. The goal is to allow communities to create their own 3D printers without having to invest in expensive equipment. Four RepRap models have been released to date.


The process of pulling the filament back from the hot end during printing. If printing a single unit object such as a cup, no retraction is necessary; but if printing a complex object such as a hand, retraction is needed to prevent the molten filament from forming strings between the fingers.


The smaller the layer height used to print a 3D model, the finer the model – but the longer the print will take. 3D preparation software allows the outer skin to be printed at double resolution (in other words, half the layer height) to give the model a smoother final appearance.


Previously published by Google, Trimble Sketchup is a free, easy-to-use 3D modeling application. Although designed as an architectural tool, many designers use Sketchup to create printable 3D designs.


Before printing a model, some G-code programs instruct the printer to first print a thin bounding line a short distance from the object’s edges. This forms the dual function of ensuring that the object will fit on the print bed, and initiating the extrusion process so that the filament flows smoothly.


Stereolithography is a process devised in 1986 whereby solid objects are built up by focusing a beam of ultraviolet light onto a basin of liquid polymer. The process is used mainly for rapid prototyping, as it’s ideal for the preparation of complex models. A Kickstarter project, Formlabs, aims to market an affordable home SLA printer, but has run into legal patent infringement problems.


The process by which a 3D model (usually in STL format) is turned into a G-code file that can then be interpreted by a 3D printer. Slicing involves defining the object as a sequential series of layers, printed from the bottom up. The thinner the layers, the finer the resulting print.

MakerBot offer bespoke slicing software called MakerBot Desktop available to download here on our website, but you can also see what its all about here on our MakerBot 3D Printer pages


Selective Laser Sintering is a method of 3D printing whereby a bath of plastic powder is subjected to a high power laser, which fuses the powder together to form a solid object. When printing is finished, the remaining powder is blown away and can be reused. Unlike FDM, the SLS process can produce very complex objects; but SLS printers are typically very much more expensive than FDM machines.

Stepping motor

A motor capable of very precise small movements, as opposed to the high-speed spinning produced by regular motors. Stepping motors are used to control the position of the print head on each of the X and Y axes, while a third stepping motor shuffles the bed down along the Z axis after each layer is printed; a fourth stepping motor is used to push the filament through the Bowden cable.


Short for stereolithography, STL is a file format used to describe 3D models. It differs from formats such as OBJ in that it specifies the surface of the model only, but not the colour or texture. STL is the most common format used when exchanging and publishing 3D models suitable for printing. All CAD applications can export STL files, but design programs such as Photoshop and Poser cannot; instead, they export OBJ files that need to be converted to STL format.

Support material

FDM printers print layer after layer, from the bottom up. Since they’re unable to print on thin air, any parts with serious overhanging elements need to be supported by additional material, which is then trimmed away after the print is finished. Some preparatory software is able to calculate and define this support material automatically, and to insert it as part of the resulting G-code.


A community website owned by Makerbot Industries, Thingiverse is a site where designers can upload 3D models in the form of STL files. Other users can then download and print these files, which are often modified and republished with improvement and enhancements.

X, Y, Z axes

Taken from traditional geometry, the X and Y axes (devised by Rene Descartes in 1637) are the forward/backward, left/right motion of the 3D print head as it prints each layer in two-dimensional space. The Z-axis is the vertical component, controlled by a stepper motor that jogs the print bed down when each layer has been printed.

Paul Brewer

31 thoughts on “3D Jargon Buster”

  • hack instagram accounts

    When I posted them, as captions, I put happy b day to my baby and 10 months with this.

  • quest bars

    I could not resist commenting. Very well written!

  • quest bars

    Greetings! I've been following your website for some time now and finally got the bravery to go ahead and give you a shout out from Humble Texas!

    Just wanted to say keep up the great job!

  • quest bars

    Good web site you have got here.. It's difficult to find high quality writing like yours nowadays.
    I honestly appreciate people like you! Take

  • quest bars

    I like the helpful info you provide in your articles. I'll bookmark
    your weblog and check again here frequently.
    I am quite sure I will learn a lot of new stuff right here!
    Good luck for the next!

  • FredVWitcher

    This information is invaluable. When can I find out more?

  • PhilipQLei

    I'm impressed, I must say. Seldom should i encounter a blog that's both educative and
    interesting, and without a doubt, you've hit the nail on the head.
    The problem is an issue that not sufficient folks are speaking intelligently about.

    I am thrilled that I came across this during my hunt for something in regards to this.

  • CyrilIErrico

    It's actually a nice and helpful part of info.
    I am happy that you just shared this helpful information around.
    Please stay us up to date like this. Thanks for sharing.

  • JasonBWage

    Thanks for sharing your thoughts on Shropshire 3D Printers.

  • KirbyBMelius

    Hi there to all, since I am truly eager of reading this blog's post to be
    updated regularly. It carries nice data.

  • Paul Brewer

    Google is your best bet

  • NakiaPLoxley

    you are really a just right webmaster. The site loading velocity is amazing.
    It kind of feels that you're doing any unique trick.
    Also, The contents are masterpiece. you have performed a
    fantastic process on this matter!

  • LoydLVazguez

    It's awesome to visit this web page and reading the views of all mates concerning this post,
    while I am also eager of getting experience.

  • ShareeHLoter

    Wow, fantastic blog layout! How long have you been blogging for?
    you made blogging look easy. The overall look of your site is fantastic, as well as the content!

  • JeneeQHarter

    This site certainly has all the info I wanted concerning
    this subject and didn't know who to ask.

  • KileyOGavell

    Hey very nice blog!

  • PiaLAvrett

    hey there and be grateful for your information - I've definitely found something new from on this site.
    I did however expertise a couple of technical points employing this site,
    since I experienced to reload the site many times previous
    to I really could have it to load properly. I had been wondering should
    your hosting is OK? Not that I am complaining, but slow loading instances times will very frequently affect your placement in google and can damage your high-quality score if ads and marketing with Adwords.

    Well I am just adding this RSS to my e-mail and could consider a great deal much
    more of your respective exciting content. Make certain you update this again soon.

  • Jade

    It is perfect time to make a few plans for the future and it is
    time to be happy. I have read this publish and if I may just I desire to recommend you some
    attention-grabbing things or advice. Perhaps you can write
    subsequent articles regarding this article. I desire
    to learn even more issues approximately it!

  • JunkoAWalmer

    hey there and be grateful for your info - I actually have certainly found something new from right here.
    I have done however expertise some technical points applying this site, as I experienced
    to reload the site many times previous to I could obtain it to load properly.
    I was wondering should your hosting is OK?

    Not that I'm complaining, but sluggish loading instances
    times will very frequently affect your placement in the search engines and could damage your good quality score if advertising and marketing with Adwords.
    Well I'm adding this RSS to my e-mail and could consider a lot more of your respective
    exciting content. Make certain that you update this again soon.

  • IselaFKlegin

    I used to be able to find good advice from your content.

  • RufusKFraker

    Im not too a great deal of online reader in all honesty yet your sites really nice,
    make it up! I'll just bookmark your site to return afterwards.

  • MariaKRisk

    Hi, I really do think this really is a great blog. I stumbledupon it ;
    ) I may return yet again since i have have saved as a favorite it.
    Money and freedom is the best method to change, may you be rich and then guide others.

  • LinnieWDolle

    Wonderful blog you have here but I was curious if you knew of any user discussion forums that cover the same topics discussed here?

    I'd really love to be a part of group where I can get feed-back from other experienced people that
    share the same interest. If you have any suggestions, please let me know.


  • OlinCMarchio

    What you posted was very logical. But, think on this, suppose you were to write a killer post title?
    I am not saying your content isn't solid, however what if
    you added a headline that grabbed folk's attention? I mean 3D Jargon Buster
    | Shropshire 3D Blog is kinda plain. You should peek at Yahoo's front page and see how they create news titles to grab viewers interested.
    You might add a related video or a pic or two
    to get readers interested about what you've written. Just
    my opinion, it would bring your blog a little livelier.

  • valentine sayings

    Hello There. I found your blog using msn. This is an extremely
    well written article. I will be sure to bookmark it and return to read more of your
    useful info. Thanks for the post. I will definitely return.

  • http://www.boudoirrougephoto.com/

    Hmm is anyone else experiencing problems with the images
    on this blog loading? I'm trying to figure out if its
    a problem on my end or if it's the blog. Any suggestions would be greatly

  • Rickie

    whoah this weblog is great i love reading your articles.
    Stay up the great work! You already know, a lot of individuals are looking round
    for this info, you could help them greatly.

  • www.harskjold.com

    bookmarked!!, I like your website!

  • itsaboutthyme.com

    Hi I am so grateful I found your web site, I really found you by accident, while I was searching on Aol
    for something else, Nonetheless I am here now and would just like to
    say thanks a lot for a tremendous post and a all round exciting blog (I also love the theme/design),
    I don’t have time to browse it all at the moment but I have book-marked
    it and also added in your RSS feeds, so when I have time I will be back
    to read much more, Please do keep up the great b.

  • Zenaida

    Hmm it appears like your website ate my first comment (it was extremely long) so I guess I'll just sum it up what I wrote and say, I'm
    thoroughly enjoying your blog. I as well am an aspiring blog blogger but I'm still new
    to the whole thing. Do you have any suggestions for rookie blog writers?
    I'd genuinely appreciate it.

    • Paul Brewer

      Just have an idea on a topic and write it up.. there is no magic!!! Of course your subject needs to be topical & interesting, preferably humorous even if a serious subject otherwise you amy as well write your idea on paper and throw it in a bottle into the sea.
      Good Luck

Leave a Reply

Sorry, you must be logged in to post a comment.